product support
55L rectangular step can with liner pocket
product support
55L rectangular step can with liner pocket
troubleshooting
Open the lid from the trim portion. Locate the steel chrome rod at the rear of the unit and wipe and lubricate it using WD-40 or similar lubricant.
To close the lid properly, separate the lid and trim with your hand and manually push the trim down. When pushing it down, you will hear a slight noise. The noise you are hearing is normal and will not harm the can in any way. Watch our video on how to close the lid.
Clean stainless steel weekly with a soft cloth, warm water and a mild detergent. DO NOT use steel wool, stainless
steel polisher, bleach, salts or acids as these will damage the product. Or use our microfiber mitt, which just uses
water on one side to wash and the other dry side to wipe and polish.
Our stickers should not leave residue, but
if this happens, remove using adhesive removers such as “Goo-Gone®”, “Un-du®” or “De-solv-it®”. Be sure to rinse the
area with water and dry with a soft cloth.
Replace liner rim with lid/liner rim assembly part.
Determine if the lid posts are damaged or broken. Watch the video: https://youtu.be/vZOofmcjb1s and follow the instructions on how to remove the lid assembly from the step can. Inspect the lid posts (the part where the hinge connects to the body) for any signs of damage or breakage. If broken, replace with hinge block with liner pocket assembly part.
lid with liner rim, white steel
PD6344
lid with liner rim, matte black stainless steel
PD6343
full lid/trim ring assembly
PD6141
lid with liner rim, rose gold stainless steel
PD6167
hinge block with liner pocket assembly for CW2023 and CW2024
PD6275
linear damper
PD6216